Thanks for updating.
I am not sure about the following:
1. FTP server is on the Internet, the ftp client is Windows XP with
OfficeNet software. Is that right?
2. You want the Windows XP with OfficeNet visit FTP with active mode. Is
Please change the IE to work in Active mode FTP and see if this helps.
Please also try to disable Receive Side Scaling on SBS server, my issues
such as companyweb is resolved by doing so.
I am looking forward to hear from you.
If you need further assistance, please don't hesitate to let me know.
Microsoft CSS Online Newsgroup Support
Get Secure! - www.microsoft.com/security
This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.
For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.
Any input or comments in this thread are highly appreciated.
This posting is provided "AS IS" with no warranties, and confers no rights.
<Subject: Re: Acive FTP
<Organization: Computer Help - http://forums.techarena.in
<User-Agent: vBulletin USENET gateway
<X-Newsreader: vBulletin USENET gateway
<NNTP-Posting-Host: hostname.techarena.in 126.96.36.199
<Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:32249
<Thank you for answer.
<About yous questions:
<1) The OfficeNet is on a Windows XP client. OfficeNet use port 20 and
21 for communication with the bank. The network is a SBS2003 standard.
<2) The FTP server is not installed, because I don't use it.
<I think I can make it work if I can set the write flag for FTP. I did
this before on a Windows 2003 server with ISA 2006.
<Best regards, Roland.
<> Thanks for posting in our newsgroup and also for Claus's input.
<> From your description, I know you want to enable active FTP on SBS
<> SP2. If I am off-base, please don't hesitate to let me know.
<> Please let me know the following to make the situation more clearly:
<> 1. Where does the OfficeNet vist FTP, from LAN or Internet?
<> 2. Is the FTP server installed on SBS 2003 server?
<> By default the FTP in IIS supports both Active Mode and Passive Mode.
<> Active-mode FTP is sometimes referred to as "client-managed" because
<> client sends a PORT command to the server (over the control
<> that requests the server to establish a data connection from TCP Port
<> the server, to the client, using the TCP port that is specified by the
<> command. If using Active mode FTP, you just need to open TCP 21 and
<> Please take the following steps to see if the problem can be resoved:
<> Step 1: I strongly recommend you to rerun the CEICW. This Wizard helps
<> to publish FTP correctly. To do this:
<> 1. Open Server Management and then click Internet and E-mail.
<> 2. Select Connect to the Internet and click Next.
<> 3. Do the steps to configure network.
<> 4. On the Firewall page, check Enable firewall and click Next.
<> 5. On the Services Configuration page, make sure FTP is selected.
<> 6. Do the following steps according to the instruction.
<> For more information, please refer to:
<> 825763 How to configure Internet access in Windows Small Business
<> Step 2: Please test the FTP in Active Mode:
<> Open Internet Explorer, click 'Tools'->'Internet Options'. In
<> tab, Check 'Enable folder view for FTP site' option; uncheck 'Use
<> FTP' option (The IE will work in Active mode FTP), then try the FTP
<> For more information, please refer to:
<> 309816 How To Configure Internet Explorer to Use Both the FTP PORT Mode
<> Step 3: Please try to disable Receive Side Scaling on SBS server to see
<> the problem can be resolved. You can find the detail steps in the
<> You cannot host TCP connections when Receive Side Scaling is enabled
<> Windows Server 2003 with Service Pack 2
<> For more information, please refer to:
<> Windows 2003 service pack 2 known issues on Small Business Server 2003
<> Also OfficeNet is third party software, you can contact software
<> manufacture for more help. Thanks for your understanding.
<> Hope above information help. If you need further assistance, please
<> hesitate to let me know.
<> Robert Li(MSFT)
<> Microsoft CSS Online Newsgroup Support
<> Get Secure! - www.microsoft.com/security
<> This newsgroup only focuses on SBS technical issues. If you have
<> regarding other Microsoft products, you'd better post in the
<> newsgroups so that they can be resolved in an efficient and timely
<> You can locate the newsgroup here:
<> When opening a new thread via the web interface, we recommend you check
<> "Notify me of replies" box to receive e-mail notifications when there
<> any updates in your thread. When responding to posts via your
<> please "Reply to Group" so that others may learn and benefit from your
<> Microsoft engineers can only focus on one issue per thread. Although
<> provide other information for your reference, we recommend you post
<> different incidents in different threads to keep the thread clean. In
<> so, it will ensure your issues are resolved in a timely manner.
<> For urgent issues, you may want to contact Microsoft CSS directly.
<> check http://support.microsoft.com for regional support phone numbers.
<> Any input or comments in this thread are highly appreciated.
<> This posting is provided "AS IS" with no warranties, and confers no
<> <Subject: Re: Acive FTP
<> <Lines: 29
<> <X-Priority: 3
<> <X-MSMail-Priority: Normal
<> <X-Newsreader: Microsoft Outlook Express 6.00.2900.3028
<> <X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.3028
<> <X-RFC2646: Format=Flowed; Original
<> <Newsgroups: microsoft.public.windows.server.sbs
<> <NNTP-Posting-Host: ip68-100-76-210.dc.dc.cox.net 188.8.131.52
<> <Xref: TK2MSFTNGHUB02.phx.gbl
<> <X-Tomcat-NG: microsoft.public.windows.server.sbs
<> <If I would be in your shoes, I would uninstall SP2. As you can see in
<> <newsgroup there are just too many SBS issues still out there.
<> <> Hi everyone,
<> <> Does someone know how to enable the write flag for FTP (setting
<> <> FTP)on SBS 2003.
<> <> I am using SBS 2003 standard which has not the ISA 2004 firewall.
<> <> reason I want to kow this is because OfficeNet doesn't work anymore
<> <> after installing SP2 on SBS 2003. OfficeNet uses Active FTP ports.
<> <> Bye.
<> <> --
<> <> rdenotter
<> <> rdenotter's Profile:
<> <> View this thread:
<> <> http://forums.techarena.in
I have had no problem accessing the default FTP on port 21, but when I setup another FTP with a different port like 22 my browser nor FTP client will go through. The FTP client (Cute FTP) shows the progress of connecting, accepting the port, authenticating. When it acts like it's going to go into the folder it says: 192.168.1.10 to server address 74.xx.xx.xx.xx. 74.xx.xx.xx:29725 timeout. 1) Verify CuteFTP. 12) Verify that your anti-virus software is not at fault (try disabling it). 500 Invalid PORT Command. The Firewall Port 22 is open pointing to 192.168.1.10 and IIS firewall allows port 22. As I said the default FTP is working fine and this FTP is setup the same with the exception of the port number.Are you using Stadard or Premium with ISA installed?Standard
navigate to "Network Connection". 4. Right Click "Properties". 5. In the tab "NAT/Basic Firewall" then you can configure detail firewall configuration. 6. In the "Service and Ports" tab, configure the firewall setting for FTP. For premium SBS server with ISA installed, ISA server integrated with a FTP filter which can automatically open the ports for passive mode FTP. Please refer to the server publishing section in the following KB article: 294679 How to enable external client computers access to a File Transfer http://support.microsoft.com/?id=294679 I hope the above information helps. If you have any other questions or concerns, please feel free to let me know
access in Windows Small Business Server 2003 http://support.microsoft.com/kb/825763/en-us After we run the CEICW, there will be a rule called "SBS Internet access Rule" in ISA server. This rule will allow outbound FTP access. 2. By default, the "SBS Internet access Rule" will allow outbound FTP access. Therefore, we do not need to create other rule about FTP access in ISA. Please delete all your customize FTP rule in ISA. 3. Right click the "SBS Internet access Rule" in ISA server, select Configure FTP. Then, uncheck the Read Only option. Click OK. 4. Move this "SBS Internet access Rule" to top of the firewall rule list, and click Apply. If we cannot resolve the issue after we perform the above steps
After updating the security updates i am not able to connect ftp using cute ftp or if i type ftp.website.com . I am able to access the ftp from the server. Cant read from control socket. Socket error=#10054 my default gateway is 192.168.1.1 (sever) . all the machines are workstations. if i change the gateway to our adsl router the ftp works.What SBS version are you running? 1NIC or 2NIC setup? Are you running ISA? What updates did you apply?SBS - Starndard edition not using ISA 2 NIC .. both connected to switch all comp and the adsl router also connected to switch I updated the windows updates which come automatically2 NICs to the same switch????????
put one in I get: "Connection closed by remote host" So as you can see I am stuck. My Internet Access Rule allows outbound access for all users with all protocols and has the FTP filtering enabled with the Read Only option unchecked. Any ideas on how to correct this issue? Laramie HartmannFurther information regarding the issue I am using IE7 and from what I can gather online there may be some compatibility issues between ISA 2004 and IE7 regarding FTP access. long as I use the format ftp://username:[email protected]
Otherwise i receive: Error Code: 502 Proxy Error. However, using ftp.exe to access the same FTP server I receive the error: Host is unreachable I'm pulling my hair out on this one so any ideas are apreciated. Thanks again, Laramie Hartmann
SBS? If so, do you use ISA 2000 or ISA 2004? Please also re-run CEICW based on the following KB article: 825763 How to configure Internet access in Windows Small Business Server 2003 http://support.microsoft.com/?id=825763 Hope the information help and I look forward to your reply. CrinalHi Crina 1. SBS it self.. (dont beat me..lol) 2. No error messages. FTP in HTTP just keeps prompting for password. FTP client says username and / or password is wrong. 3. Still on ISA 2000 4. Now just realised am in 2003 NG when this is 2000 SBS ooops -- Thinking of upgrading .. COOL http://www.sbsmigration.com www.smallbizserver.net (2000 and 2003) microsoft.public.backoffice.smallbiz2000 (2000 NG) microsoft.public.windows.server.sbs (2003 NG) http://groups.google.com/groups?hl=en&
following error: windows cannot access this folder. Make sure you typed the file name correctly and that you have permission to access the folder. Details The connection with the server was reset this while as I'm perfectly able to use an client side ftp programma to comment, using the browser doesn't seem to werk, also the passive FTP was checked in the browser, no efect, thanks for any feedbackPaul go to internet explorer and then tools.Internet options and then advanced. Make sure you have a tick in Enable folder view for FTP sites. Tick use passive FTP Tick HTTP1.1 and the one below it for proxy and try again. Hope this help ParisParis,Paul, are you using firewalls and NAT etc etc. Might need to look at that config as well. ParisParis, checkthem, one was not set HTTP 1.1
.5 and i VPN all the time for email and have mapped drives to copy to local C: edit, then copy back to the server - it works fine but obviously is due to DSL service upload speed. We have one shared data folder that everything is saved in. Would it be possible for me to setup an FTP server than can use this shared folder so i can access via FTP through VPN. Our PIX firewall is only open for SMTP and PPTP so i don't really want to open for FTP. Will FTP "work" through a VPN?Geoff: Why not use RWW, straight RDC session or RDC session with a VPN to remote control a WinXP workstation on your LAN? All the data then remains on the LAN. In addition, if you need to download/upload files, you can use the Local Resources | Disk Drives feature of Remote Desktop
Microsoft CSS directly. Please check http://support.microsoft.com for regional support phone numbers. Any input or comments in this thread are highly appreciated. ===================================================== This posting is provided "AS IS" with no warranties, and confers no rights.Terrence, Thank you for your help. I have been working on this for a month! I disabled the ALG service and the FTP works from the clients now. The startup type was already set to manual so I am wondering what other service started it. I guess I need to disable the service in startup type. I was wondering what side effects stopping ALG cause. Does stopping the service cause any NAT connection problems? Do you know of any other issues? Thanks again, MikeHello Mike, Thank
;#39;t, because the connection is timing out, I'm assuming by the Windows message. I have "FTP Server Access" disabled, and "FTP Outbound Access" enabled, and "read only" unticked. I created a policy for Domain Admins, accessing the FTP protocol, allowing them full access, but it does not work.I tried that, I click both applies, on the ftp window and on ISA 2k4. I have the FTP Server rule set to not read only and disabled, because I'm not running FTP on the sbs machine. I have the FTP rule set to not read only and enabled. Both are set for Local Host->External. I created an FTP Access rule for the FTP protocol, from Internal to External, for just DA's, and it doesn't work. It is like
) Server on a separate W2K3 Server outside the LAN. The B2B Web abd the FTP Server each has thier own fixed IP that is separate from the router fixed IP. Internet SWTICH-------------B2B Web & FTP Server Netopia-R910 Router ISA/SBS2K3R2 LAN The ftp server is getting hammered with hack attempts I've set Filezilla to Autoban IP's but some the hack attempts show as coming from the IP of the router so when it gets autobanned the internal LAN can't access the ftp. There has been no succesful breach and there are very strong passwords on all of the ftp users. A few questions: How are the attempts showing from the router? Is there a way through ISA or the Netopia to make the interal access to ftp show from a different IP and then I could just backlist the router fixed IP
Hi everyone, We setup an SBS Windows 2k3 R2 with ISA 2004 and Exchange. Our network has a load balacing router (Linksys RV042) as well. We got an application which once a week we have through a script to update it, but it doesn't work. According to the supplier we have to open the ftp port. We pointed the RV042 to this ftp server and we opened a rule on the ISA server, but still doesn't work. I post here the log of the connection - hope you can help us. Thanks in advance. (XXXX -> deleted the name of the application and other info) |**** 05/11/2008: Start script program XXXXXX.exe ** (V:184.108.40.206) ** | |Title "XXXXXXXXX >>>VERSION 3.0<<< " |XXXXXXX " © ray 2006 "
Hi, what is good FTP server software to use? On a W2K server we have many ftp clients have connection difficulties, sometimes MAC problems, sometimes passive/active problems and sometimes FETCH client problems etc. Currenly not using any third party FTP server. Thinking of going to this. Any advice on what is a good product? Paddy.I use Gene6FTP server. Once set up, it runs well. Was a bit tricky to figure out, but I had NO FTP server experience before using it. It also allows for virtual domains. -Mike
I just installed ISA 2004 on my main SBS 2003 server. Whenever i try and access the FTP server for my website i get an error 550 Acess Denied make sure u have permission to access this folder. I have also tested this out at home were i dont have the ISA 2004 firewall and i can access it jsut fine. I followed these steps below to solve the issue but it didn;t solve it ISA2004 defaults Access Rules involving FTP to Read Only. Right-click the relevant Access Rule, choose Configure FTP, and remove the Read Only tick. OK, and then hit the big Apply. Is there any else i can check?Look at your ISA rules. Make sure the 'SBS FTp Outbound Access' rule has both 'Internal' and 'Localhost' in the From/Listener column
you able to add other links to http sites? Since this is a complex issue and it is related to multiple technologies (IIS/IE/WSS), it may take some time to troubleshoot the problem. Based on my research, I found that the following KB may solve the problem. "The Page Cannot Be Displayed" Error Message Occurs When You Try to Access an FTP Site http://support.microsoft.com/kb/328785 Please follow the instruciton described in the KB to uncheck the "Show friendly HTTP error messages" box. Thank you for your time and I look forward to your update. Bill Peng MCSE 2000, MCDBA Microsoft CSS Online Newsgroup Support Get Secure! - www.microsoft.com/security ===================================================== When responding to posts, please "Reply
: MSFTPSVC Categoria evento: Nessuno ID evento: 100 Il server non è in grado di garantire l'accesso all'account di Windows NT 'administrator' a causa del seguente errore: Errore durante l'accesso: nome utente sconosciuto o password non valida. . Il codice errore è nei dati. and: Tipo evento: Errore Origine evento: MSFTPSVC Categoria evento: Nessuno ID evento: 8 Descrizione: Il servizio FTP non è riuscito a creare un thread di lavoro del client per l'utente connesso all'host 220.127.116.11. Connessione all'utente terminata. Il codice errore è nei dati. Microsoft internet explorer Yes! i'm very very sure :-) In the browser repeat the mask for logon and in event viewer the error in the point 2. Is not anonimous user
. Now all they need is a password and they use random passwords dictionary type scripts that constantly run using diffferent variations. Chances are it will take them time to correctly come up the proper password but all they need is the username and the port and the logins are all self automated using a password dictionary script. My security logs are constantly filled with these failed attempts. So now I only turn on FTP when needed.Hello, having seen this myself and back in the days when you could walk the IIS tree, gain CMD access to the server and change things around on the OS partition, I have always steered clear of these things. Now that IIS6/7 are much more secure and partitioned, things are more secure but users arn't. I like Susan's idea of a third party
services on the SBS so that I can receive faxes to the FTP software?I don't know what you are trying to do but in order to uninstall the FTP service, go to the 'Control Panel' select 'Add/Remote Windows Components' | Application Server | Internet Information Services | FTP Service Hope that helpsNot sure if FTP needs to be uninstalled, just disable/remove the FTP sites in the IIS manager (which I don't think are created by default anyways). You're right though, it kind of depends upon what the OP is trying to do Yes, you don't need to uninstall FTP. I use FileZilla on one SBS box to act as the FTP server and never needed to remove the Windows FTP. As Allan said, this probably does require that you are not using it
point though. If you know how to fix this problem, please give me a hint. If you see a security problem, tell me about it in more detail.do you have disk quota active?I did have it active on the drive where the ftp home directory was stored, and saw that the Internet Guest user had reached 100% of quota limit. First I set the quota limit to "no limit" and restarted the computer. No luck. Then I disabled quota management and it seems to have fixed the problem. Thanks so much! Is it terribly unsecure to run the ftp server in the way that I have it set up? It is: -behind a hardware firewall -limited access to (1) IP address (can this be spoofed?) -using anonymous login to eliminate unencrypted passing of usernames/pwds over the internetLimited to 1 IP you
data transportation works in active mode. Please take the following steps to let the IE will work in Passive mode. 1. Open IE Internet Options. In 'Advanced' tab, 2. Uncheck 'Enable folder view for FTP site' option; check 'Use Passive FTP' option (The IE will work in Passive mode FTP) 3. Please check if the problem will be resolved. 309816 How To Configure Internet Explorer to Use Both the FTP PORT Mode and http://support.microsoft.com/?id=309816 If the problem persists, please help me gather the following info so that I can perform some further analysis: 1. Please help to gather the ISA Info: 1) Download the file from the following URL:http://www.isatools.org/isainfo/ISAInfo.zip 2) Extract all files to a folder on ISA server. 3
any files. I had the same issue before on my server, and just had to tick the enable box in the isa policis for FTP. I have done this and it is still notworking for the client. They are using a ftp program, would they need to enter any proxy server settings in this, as on my system you do not. Stevensee if there is a check in the ftp app for passive modeHi yes, he sent thru a screen shot and it does have passive mode tickeddo they have the firewall client installed do theu have a rule in ISA for ftp out?Hi Yes to Firewall client yes, its the default rule in ISAStill showing 550 Access is denied. StevenHi got it working, in ISA under Internet Rule, right click : Properties FTP, untick the read onlyHi How do i do this. Before i just ticked the box enable. Do i have to add a new
have this configuration permantly. I have now also discovered that if you remove the check to enable packet filtering and then go in and check it again with out starting and stopping the services it works. Can someone help me understand what is happening here? ml long" seldom around article it for click or FTP's workstation. where string. and ftp:\\user:[email protected]
, .Hallo there Not a very good description - do you mean you only have problems accessing ftp site? Or any website? Anyway have you configured the LAN settings in IE? After installing ISA Server all web traffic is routed through the proxy server, which is part of ISA. In the client computer IE is configured by the installation scripts to add the correct settings, but on the server you have to do
over the Internet results when you attempt transfers through a Network Boundary Securing Device (NBSD) such as a proxy, firewall, or Network Address Translation (NAT) device. In most cases the NBSD allows the control connection to be established over TCP 21 (that is, the user can successfully log on to the FTP server), but when the user attempts a data transfer such as DIR, LS, GET, or PUT, the FTP client appears to stop responding because the NBSD is blocking the data connection port that is specified by the client. If the NBSD supports logging, you can verify port blocking by reviewing the deny/reject logs on the NBSD. http://support.microsoft.com/Default.aspx?id=283679Bill, I had the same problem awhile back and I did some research and I found out that the problems appears
efforts have still not been able to connect to the server via Filzila. I have found Filezila very easy to use in the past, however, I cannot currently get it to connect, can you advise any settings I should look for to ensure I can connect. Regards, LesJust to clarify, I believe the filezilla recommendation was not for
the client. If you check out their website, they also offer an FTP
server product that is very nice and configureable. But, back to your
question, the filezilla client should be telling you what is going on
to some extent. What kind of error are you getting? Unable to
connect? Authentication errors? Timeouts?
Also, a bit more info on what you are trying to do would be helpful.
Are you trying to connect from the internet? Over a LAN? Through a
3. What do you mean by ¡°logged in 2 times¡±? Does that mean you have logged on to two sessions at the same time or failed to logon to only one the first time but succeeded the second time? 4. Do you have any Event logs related to this issue? 5. Do all the clients have the problem accessing the FTP sites? 6 .Does this happen when accessing other FTP? 7. What is the detailed information in the FTP log? Please feel free to let me know if you have any questions or if you need further assistance. Have a nice day! Jerry Zhao (MSFT) Microsoft Online Partner Support Get Secure! - www.microsoft.com/security ===================================================== When responding to posts, please "Reply to Group" via your newsreader so that others may learn and benefit
mean by LARGE files RussRuss, if I have the second Window 2003 member server on the SBS with a router/firewall in between the SBS and the cable modem, how would you configure the Win 2003 to be the FTP server? Would this be best with ISA loaded up on the SBS where I can publish the FTP to the secondary Win 2003 member server?Sorry, one more thing. Would it be best to have the external clients us the Filezilla client or can they use IE since everyone already has IE 6 or 7?I'd want the FTP server OFF the SBS server and pass the Port21 through to your FTP box You can use IE Explorer with FileZilla But If they use Filzilla Client it has better options for larger files. (Allows reconnect if disconnected.) At 250MB files I hope you have Good Bandwidth? Or they will put files